PENNTROWEL™ Epoxy 60/60 MR Lining System – Silica and Carbon Grade

Alphatherm Inc > Products > Corrosion Engineering > Coatings & Linings > PENNTROWEL™ Epoxy 60/60 MR Lining System – Silica and Carbon Grade

PENNTROWEL™ Epoxy 60/60 MR Lining System – Silica and Carbon Grade

60 mil Silica-filled Epoxy Lining with Optional Mat Reinforcement

PENNTROWEL Epoxy 60 MR Lining is a nominal 60 – 65 mil epoxy-based monolithic lining system. The system consists of a penetrating primer, followed by a 60 mil trowel applied base coat. An optional final topcoat can be added to seal the lining and adjust finished surface texture if desired.

To upgrade the system, PENNTROWEL 60 MR can be specified. This option incorporates a glass mat reinforcement layer and saturant over the primer to minimize crack transmission into the lining in the event cracks emanate from the concrete.

For immersion service the upgraded MR system is recommended. PENNTROWEL Epoxy 60 MR Lining has been formulated to perform in chemical immersion, as well as splash and spill. The system can perform well in the wide range of temperatures common to sumps, trenches, pits and vessels.

Inquire
Have a question ?call us today 905-948-9949 or fill up the form below

Enter the details to be in contact with a representative